FAQ

Here is a guide to maintaining a robot vacuum:

1. Regular cleaning of the brushes and rollers:

   • Switch off the Robot Vacuum Cleaner and remove it from the charging station.
   • Remove any hair, fibers and dust that may have wrapped around the main brush and side brushes.
   • Check the rollers for wear and clean them if necessary.

2. Empty the dust container:

   • Remove the dust container according to the manufacturer's instructions.
   • Dispose of the collected dirt in a waste garbage can.
   • Clean the dust container with a damp cloth to remove any residue.
   • Make sure that the dust container is completely dry before you put it back in.

3. Cleaning the sensors:

   • Check the sensors for dirt or dust.
   • Use a soft, dry cloth to carefully clean the sensors and ensure that they are working properly.

4. Cleaning the wheels:

   • Check the wheels for dirt and remove any dirt, dust or hair that may have gotten caught in them.
   • Make sure that the wheels can turn freely to ensure optimum performance of the robot vacuum.

5. Check and clean the filters:

   • Remove the filter according to the manufacturer's instructions.
   • Gently tap or brush the filter to remove dust and dirt.
   • Some filters are washable; in this case, rinse the filter thoroughly with water and allow it to dry completely before reinserting it.

6. Perform software updates:

   • Check regularly for available software updates for your robot vacuum.
   • Follow the manufacturer's instructions to carry out updates to ensure that your robot hoover always has the latest functions and improvements.

7. Check the moving parts:

   • Regularly check the robot vacuum's moving parts, such as the wheels, brushes and flaps, for signs of wear or blockages.
   • If necessary, contact the manufacturer or an authorized service partner to repair or replace defective parts.

8. Maintain the charging and cleaning station:

   • Keep the charging station clean and free of dust and dirt to ensure smooth operation.
   • Occasional wiping with a damp cloth can help to remove deposits.

9. Observe safety precautions:

   • Always switch off the Robot Vacuum Cleaner before starting maintenance and unplug it if necessary.
   • Always read the manufacturer's operating instructions before carrying out maintenance to ensure that you follow the recommended procedures.

10. Carry out regular maintenance:

    • Carry out the above steps regularly, ideally after every cleaning mission or depending on how often your robot vacuum is used.

By carrying out these steps regularly, you can ensure that your robot hoover works efficiently and provides optimum cleaning performance